Quick start guide – Sony SLV-SE220D User Manual
Page 80
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Quick Start Guide
I Connecting the VCR
:Signal flow
1
...Connect the aerial t o n r of the VCR.
2
... Connect® and the aerial input of your
TV using the supplied aerial cable.
3
...For better picture and sound, connect
LINE-1 (EURO AV) to your TV using a
Scart cable if your TV has a Scart
(EURO-AV) connector.
4
... Connect the mains lead to the mains.
3
.. . Press
to select a language,
then press OK.
4
.. . When the COUNTRY SELECTION
menu appears, press
\
/
\
/
<
/
,
to
select a country, then press OK.
When all of the receivable channels are
preset, the menu disappears from the TV
screen. You can rearrange the programme
position in any order (see “Changing/
disabling programme positions”).
3 Setting the clock
1
.. . Press MENU, then press M/m/
highlight CLOCK SET and press OK.
2
... Press M/m to set the hour, then press ,.
3
... Press
M
/
m
to set the minutes. Set the
day, month, and year in sequence by
pressing , to select the item to be set,
and press
M
/
m
to select the digits, then
press OK.
4
.. . Press MENU.
Now you can operate your VCR.
2
Using the Auto Set Up function
1
... Turn on your TV and set it to the video
channel.
If your TV does not have a Scart
(EURO-AV) connector, tune the TV to
channel 32 (the initial RF channel ofthis
VCR). Refer to yourTV’smanualfor
TV tuning instructions. If the picture
does not appear clearly, see “To change
2
... Connect the mains lead to the mains.
Sony Corporation
AC68-01788A