Sony SLV-SE220D - Manual (Page 19)

Additional connections
To a stereo system (not
available on SLV-
SE620D/E and SE220D)
You can improve sound
quality by connecting a
stereo system to the AUDIO
R/D L/Gjacks as shown on
the right.
: Signal flow
LINE-3 (DEC/EXT)*
LINE-2 (DEC/EXT)*
LINE
OUT
I
--------------- \----------------
Scart cable (not supplied)
: Signal flow
To a satellite or digital
tuner with Line Through
(not available on SLV-
SE620D)
Using the Line Through
function, you can watch
programmes fTom a satellite
or digital tuner connected to
this VCR on the TV even
when the VCR is turned off.
When you turn on the
satellite or digital tuner, this
VCR automatically sends the
signal from the satellite or
digital tuner to the TV
without turning itself on.
1 Connect the satellite or digital tuner to the LINE-3 (DEC/EXT)** or
LINE-2 (DEC/EXT)*^ connector as shown above.
2 Turn off the VCR.
To watch a programme, turn on the satellite or digital tuner and the TV.
Notes
• The Line Through function will not operate properly if POWER SAVE in the
USER SET menu is set to ON. Set POWER SAVE to OFF to ensure proper
operation (see page 67).
• You cannot watch programmes on the TV while recording unless you are recording
a satellite or digital programme.
• This function may not work with some types of satellite or digital tuners.
• When the VCR is turned off, set the TV to the video channel.
*■ SLV-SE820D/E only
*
2 SLV-SE727E, SX727D, SE720D/E, SX720D/E, SE620E and SE220D only
Connecting the VCR 19