Sony SLV-SE220D - Manual (Page 57)

To use the shuttle ring in normal mode
During playback or pause, turn the shuttle ring clockwise or anticlockwise.
Each change in the shuttle ring position changes the playback mode in the
following way.
Pause
Slow motion
in reverse
Slow motion
/
Normal speed
in reverse
/
Double speed
in reverse
i
High speed in
reverse
\
Normal speed
""'“ a '! e ‘ d ’
Double speed
i
High speed
>
a
a
5'
3
SL
O
T3
(D
To use the shuttle ring in jog mode
Use this mode for frame-by-frame playback.
Press JOG to enterthejogmode. TheJOG buttonlights up. Ifyouchange
to thejog mode during any playback mode, playback pauses so you can see a
still picture. Each change in the shuttle ring position shifts the picture one
frame. To shift frames in reverse, turn the shuttle ring anticlockwise. The
frame shift speed depends on the speed you turn the shuttle ring.
To resume normal mode, press JOG again. The JOG button turns off.
Tip
• Adjust the picture using the PROGRAM +/- buttons on the VCR if:
-Streaks appear while playing in slow motion.
-Bands appear at the top or bottom while pausing.
-The picture shakes while pausing.
To set tracking to the centre position, press both buttons (+/-) at the same time.
Notes
• The sound is muted during these operations.
• In the LP mode, noise may appear or there may be no colour.
• If the playback mode mark does not appear on the TV screen, press© DISPLAY.
• The picture may show noise when playing at high speed in reverse.
• The picture returns to normal playback from slow motion in reverse in 30 seconds.
o
3
VI
Playing/searching atvarious speeds 57