Sony SLV-SE220D - Manual (Page 58)

Setting the recording duration time
After you have started recording in the normal way, you can have the VCR stop
recording automatically after a specified duration.
Before you starts
• Refer to “Index to parts and controls” for button locations.
^ While recording, press Z REC.
The© indicator appears in the display window.
n - i r i
©
8
p / '
I J - J L I
(70
V I D E O
_ n- J n ®
I IJ-JLI ^
2 Press REC repeatedly to set the duration time.
In SP mode
Each press advances the time in increments of 30 minutes.
0:3^ —► 1:00------- ► 4:0^ 4:3^ Normal recording
:
In LP mode
Each press advances the time as shown below.
0:3^ —► 1:00--------► 8:0^ 9:0^ Normal recording
J
The tape counter decreases minute by minute to 0:00, then the VCR stops
recording and turns off automatically.
To extend the duration
Press REC repeatedly to set a new duration time.
To cancel the duration
Press REC repeatedly until the 0 indicator disappears and the VCR
returns to the normal recording mode.
To stop recording
To stop the VCR while recording, press ■ (stop).
Note
• You cannot display the current tape time in the display window when setting the
recording duration time.
58 Setting the recording duration time