Adjusting the picture, Adjusting the tracking, Adjusting the picture sharpness (smart trilogic) – Sony SLV-SE220D User Manual
Page 66: 66 adjusting the picture
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjusting the picture
T R A C K I N G -
Adjusting the tracking
Although the VCR automatically adjusts the
tracking when playing a tape, distortion may
occur if the recording is in poor condition. In
this case, manually adjust the tracking.
During playback, press PROGRAM +/- on
the VCR to display the tracking meter. The
distortion should disappear as you press one
of the two buttons. To resume automatic
tracking adjustments, eject the tape and re
insert it.
Adjusting the picture sharpness (Smart trilogic)
You can automatically adjust the sharpness of the picture.
^ During playback, press MENU, then press M/f/
USER SET and press OK.
2 P r e s s t o highlight SMART
TRILOGIC, then press ,.
Tracking meter
■ to highlight
O S D
O N
T A P E S E L E C T
E 1 8 0
C O L O U R S Y S T E M
A U T O
F O R M A T 1 6 : 9
A U T O
N I C A M
O N
P O W E R S A V E
O F F
I
S M A R T T R I L O G I C
O N
S E L E C T S E T
: ►
E N D : O K E X I T : M E N U
3 Press M/f to set SMART TRILOGIC to
ON or OFF.
• ON: Picture sharpness is automatically
adjusted.
• OFF: Adjust the picture sharpness
manually.
To soften the picture, press <.
To sharpen the picture, press ,.
^ Press MENU to return to the original screen.
■PIC
S M A R T T R I L O G I C : O F F
S O F T E N
S H A R P E N
*
O N / O F F
: A T
S E T : ◄ ►
E N D
: O K
E X I T : M E N U
66 Adjusting the picture