Sony CCD-TR9 - Manual (Page 52)

To edit more
scenes Repeat steps 6 to 8.
To stop editing
momentarily Press II on the recording VCR.
To stop editing Press □ on both the camcorder and the VCR.
Use of the EDIT
switch
When you slide EDIT in the direction of the arrow (EDIT ON), you can keep
picture and deteriorations resulting from editing to a minimum. Avoid using the
edited tape for multiple generations of editing. However, when you edit or copy
to another VCR after editing, be sure to set this switch in the opposite direction
of the arrow (EDIT OFF).
Replacing Recording on a Tape (Insert Editing)
You can insert a new scene from a VCR onto your originally recorded tape by
specifying starting and ending points.
VCR (Player) I
Camcorder (Recorded I
Connection
To replace
reooriHngs
Connections are the same as in “Recording from a VCR or TV (page 47)”. Before
you begin replacing recordings, set the VCR to the playback pause mode at the
beginning of the scene to be recorded.
1
While pressing the small green button on POWER,
slide POWER to VTR.
The counter appears in the display window.
power ! llfl
COUNTER
0:0 I SO
52
Chapter 3: Advanced Operation