Sony CCD-TR9 - Manual (Page 51)

How to edit
4
6
5
3
1
Insert a tape to be recorded into the
recording VCR.
Siide EDIT on the camcorder In the direction of
the anxMw.
EDIT
Make sure that IN/OUT is set to OUT.
IN
OUT |4
While pressing the small green button on POWER,
slide POWER to VTR.
POWER
ICAMERAiPf&i VTR I
Insert your recorded tape into the camcorder.
Play back tape on the camcorder until you locate
the point where you want to start editing, then set the
camcorder to the playback pause mode.
On the recording VCR, locate the recording start
point and set the VCR to the recording pause mode.
8
Press II PAUSE on the camcorder and VCR
simultaneously to start editing.
Chapter 3: Advanced Operation
51