Tomei Powered MAIN STUD LADDER SET - Manual (Page 6)

CAUTION
■ This product is designed to be used for off road competition purposes only.
■ This product is to be installed by a qualified professional in a fully equipped workshop.
■ This product was designed specifically for the application specified. If the attempt was made to
use this product on another engine/car other than specified then you will risk damaging this kit
and or the engine or components related with it.
■ This product is designed to suit performance engines that are used for high engine speeds,
high power with high loads and stress environments. This product along with the other parts in
the assembly will be exposed to these high stress conditions which will require meticulous
planning and precision assembly. Without the strict precision procedures carried out, you'll risk
damaging this product and the engine.
■ This product is to be installed with the appropriate tools and equipment to prevent any engine
failures and injuries or bodily harm.
■ If you only purchased the Crank Cap Ladders, you won't be able to use the stock OEM bolts
with these. You'll need to get longer Main Studs like our Tomei Main Studs.
WARNING
■ This product is to be installed when the engine and engine bay is cold.
■ Due to the application of this product, please be sure that all parts are assembled and fitted
correctly to avoid any possible fire risk hazards and or terminal engine failure.
6
KIT CONTENTS The following items illustrated below are the items included in the kit.
Item Quantity is noted in ( ).
REQUIRED TOOLS
The following tools are recommended for the installation process.
・ General Engine Maintenance Tools ・General Engine Maintance equipment
(Torque Wrench) ・Manufacturers Workshop Service Manual ・Thread Lock Paste
・
M10 x P1.25 Tap ・Tap Handle ・Tapping Paste
ARP Molybdenum Grease (1)
Crank Cab Ladder (5)
12 Hex Nut (10)
Main Stud (10)
6 Point Hex Nut (4)
Washer (10)
6