Cabletron Systems STHI - Manual (Page 55)

The Component Status Screen
Page 5-20
5.6.4 NEXT and PREVIOUS
The Chassis Status View screen lists ports in ranges of 12 at a time. Use the
NEXT and PREVIOUS screen commands to view ports from the next or
previous range.
5.6.5 ENABLE ALL PORTS
Invoke this screen command to enable all ports in the stack. It is available
only in
ADMINISTRATIVE mode.
5.6.6 REFRESH
The user may toggle this screen command to select screen refresh intervals
from 3 to 10 seconds.
5.7 The Component Status Screen
Access the Component Status screen (Figure 5-11) from the Device Status
menu.
Figure 5-11. Component Status Screen
The Component Status View screen is a read-only screen which lists the
enabled/disabled status of the STHI hub’s operating system and
associated components. (Software applications, resources, and functions
registered in the STHI are known as components.) All compatible
STHI LOCAL MANAGEMENT Flash Image Version: 1.00.00
COMPONENT STATUS VIEW
COMPONENT NAME
STHI Chassis MGR
STHI LIM
STHI Protocol stack
STHI SNMP agent
Network 1
REFRESH 3sec RETURN