Cabletron Systems STHI - Manual (Page 42)

Using LM Screens
Page 5-7
SNMP Traps
3
The SNMP Traps screen (Section 5.5) is used to designate which Network
Management Workstations will receive SNMP traps from the STHI, and to
provide those stations with community names for access to various MIBs.
Chassis Status View
4
The Chassis Status View screen (Section 5.6) is used to monitor and
configure the modules in the stack, to set operational configurations for
TCU ports and RI/RO ports, and to execute port/module bypassing.
Component Status
5
The Component Status screen (Section 5.7) is used to view the operational
status of various functional entities within the STHI.
Device Statistics
6
The Device Statistics screen (Section 5.8) is used to view network
performance statistics and network configuration information.
SNMP Tool
7
The SNMP Tool screen (Section 5.9) is used to view and manipulate MIB
objects.