Dell 2350 Wireless Broadband Router - Manual (Page 77)

Dell Wireless 2350 Broadband Router.
Internet DSL or
cable
modem A steady green light indicates the connection is active (i.e. the Dell Wireless 2350
Broadband Router is connected to a xDSL or cable modem) and blinks with data
activity.
LAN 1
LAN 2
LAN 3
LAN 4 Local Area
Network A steady green light indicates the connection is active and blinks with data activity.
Back to Top
Back Panel
Back Panel
Connector Description
Power Connect the power adapter to this power port, and then plug the other end of the power cable into
a power outlet.
Reset Use an object, such as a paper clip, to press the button for at least 5 seconds. The Power LED will
be off for a short time and then light up again. You can then release the button to reset the device
to its factory-default settings.
Internet This accepts an RJ-45 connector for connecting the Dell Wireless 2350 Broadband Router to a
xDSL or cable modem
LAN 1
LAN 2
LAN 3
LAN 4 This accepts RJ-45 connectors for connecting up to 4 computers to the Dell Wireless 2350
Broadband Router's 4-port switch. These are the Ethernet connections.
Back to Top