Dell 2350 Wireless Broadband Router - Manual (Page 31)

Back to Contents Page
Factory Default Settings:
Dell™ Wireless 2350 Broadband Router User's Guide
Dell pre-configures the Dell Wireless 2350 Broadband Router with the following settings:
NOTE: If you lose track of the device settings, you can reset the router by pushing the reset button to restore these settings
back to your router.
Setting Default
User Name admin
Password admin
Device Name Dell Wireless 2350 BroadBand router
IP Address 192.168.2.1
Subnet Mask 255.255.255.0
10 Mbps Ethernet WAN IP
WAN DHCP Client Enabled
ESSID (wireless network name) wireless
Channel Auto
Encryption No Encryption
DHCP Server Enabled
NAT Routing Enabled
NOTE: Your Dell Wireless 2350 Broadband Router came with factory default settings that should work for the majority of
the network usage scenarios. However, there are cases where your network environment may require a different
router configuration.
Back to Contents Page