Dell 2350 Wireless Broadband Router - Manual (Page 204)

Type The type of routing. This can be either of the following:
LAN or WAN interface (INTF)
Static routing
Destination LAN IP
Address Either an entire network or a specific IP address. An IP address ending in .0 refers to a
network.
Subnet Mask Must follow the IP subnet mask rules
Gateway IP Address To communicate with an IP address matching the destination IP Address, the Dell Wireless
2350 Broadband Router sends all traffic through the gateway IP address listed here.
Hop Count The number of routers the packet has passed through to its destination. Hop count is used to
measure the distance between a source and a destination. If there are 3 routers between the
source and the destination nodes, the hop count for the packet will be 3 when it arrives at its
destination node.
Back to Top
System Diagnostic
System Diagnostic