Dell 2350 Wireless Broadband Router - Manual (Page 178)

The Load Default Settings page allows you to reload the factory default configurations that came with the device. When this option is
used, the default IP address is reset to the factory default value (192.168.2.1). This is equivalent to pressing and holding the Reset
button on the back panel of the device for more than 5 seconds (for more details, refer to
A Look at the Hardware ).
NOTICE: Loading the default settings option will cause the current settings for your Dell Wireless 2350 Broadband Router to be lost
and replaced with the default settings. This includes the security settings you may have set up..
Click the Start button to reload the default settings.
Back to Top
Upgrade Firmware
Upgrade the Firmware