Scsi hard-drive indicator codes, Power-supply indicator codes – Dell PowerEdge 2650 User Manual
Page 19

lists the power button indicator codes.
Power-Supply Indicator Codes
Each hot-pluggable power supply has indicators that can provide information on power status, fault, and the presence of power (see
lists the power-supply indicator codes.
Figure 2-4. Power-Supply Indicators
SCSI Hard-Drive Indicator Codes
Each SCSI hard-drive carrier has two indicators: a busy indicator and a status indicator (see
). The indicators provide information on the status of
the respective hard drive.
lists the drive indicator codes.
Figure 2-5. SCSI Hard-Drive Indicators
Table 2-4. Power-Button Indicator Codes
Indicator Indicator Code
On
Indicates that power is supplied to the system, and the system is operational.
Off
Indicates that no power is supplied to the system.
Blinking
Indicates that power is supplied to the system, but the system is in a standby state. For more information on standby states, see your operating
system documentation.
Table 2-5. Power-Supply Indicator Codes
Indicator
Indicator Code
Power-on
Green indicates that the power supply is operational.
Fault
Red indicates a problem with the power supply (fan failure, voltage error, etc.).
Power present Green indicates that power is present at the power supply and that the system is connected to a power source.