Dell Adamo XPS (Late 2009) User Manual
Page 30
Back to Contents Page
Memory Module
Adamo XPS™ Service Manual
Removing the Memory Module
1.
Follow the instructions in
Before You Begin
.
2.
Remove the computer battery (see
Removing the Computer Battery
).
3.
Open the display (see
Opening the Display
).
4.
Remove the palm rest assembly (see
Removing the Palm Rest Assembly
).
5.
Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the memory module pops up.
6.
Remove the memory module from the memory module connector.
Replacing the Memory Module
1.
Follow the instructions in
Before You Begin
.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Computer Battery
) before working inside
the computer.
NOTE:
The memory on your computer cannot be upgraded.
CAUTION:
To prevent damage to the memory module connector, do not use tools to spread the memory module securing clips.
1
memory module
2
securing clips (2)
3
memory module connector
NOTE:
The memory on your computer cannot be upgraded.