Installing red hat enterprise linux, Operating system using the dud – Dell PowerEdge RAID Controller H800 User Manual
Page 76
76
Driver Installation
Creating a Driver Update Diskette Using DKMS
Perform the following steps to create the Driver Update Diskette (DUD)
using the DKMS tool:
NOTE:
The driver must be installed on the system where this procedure is performed.
1 Install the DKMS-enabled megaraid_sas driver rpm package.
2 Type the following command in any directory:
dkms mkdriverdisk –m megaraid_sas –v
NOTE:
The values for the –d option are
suse
for Suse Linux Enterprise
Server diskettes and
redhat
for RHEL diskettes.
NOTE:
For more information on usage of DKMS, see the DKMS main page.
This starts the process to create the megaraid_sas DUD image. After the
DUD image has been built, you can find it in the DKMS tree for the
megaraid_sas driver. See the output of the dkms mkdriverdisk
command for the exact path.
Installing Red Hat Enterprise Linux Operating System Using the DUD
Perform the following steps to install Red Hat Enterprise Linux (versions 4
and 5) and the appropriate driver:
1 Boot normally from the Red Hat Enterprise Linux installation media.
2 At the command prompt, type: linux expert dd
3 When the install prompts for additional drivers, insert the diskette
or USB key and press
For information about creating a driver diskette, see "Creating a DUD" on
4 Complete the installation as directed by the installation program.
PERC7.2_UG.book Page 76 Thursday, March 3, 2011 2:14 PM