Dell PowerEdge M605 - Manual (Page 85)

Using the System Setup Program
85
Integrated Devices Screen
Table 2-5 lists the options and descriptions for the information fields that
appear on the Integrated Devices screen.
Demand-Based Power
Management
(Enabled default) Enables or disables demand-based power management.
When enabled, the CPU Performance State tables will be
reported to the operating system; when disabled, the CPU
Performance State tables will not be reported to the
operating system. If any of the CPUs do not support
demand-based power management, the field will become
read-only and is automatically set to Disabled.
Processor X ID Displays the family and model number of each processor. A
submenu displays the core speed, the amount of cache
memory, and the number of cores of the processor(s)
Table 2-5. Integrated Devices Screen Options
Option Description
Integrated SAS
Controller
or
Integrated RAID
controller
(Enabled default.)
Enables the integrated SAS or RAID controller.
User Accessible USB
Ports
(All Ports On default) Enables or disables the system's USB ports. Options are All
Ports On or All Ports Off.
SD Card Port
(PowerEdge M905 and
M805) Enables or disables the system’s internal SD card port.
NOTE:
This port is dedicated to a hypervisor, if installed.
Embedded Gb NIC x
(Enabled with PXE
default)
Enables or disables the system's integrated NICs. Options
are Enabled, Enabled with PXE, Enabled with iSCSI
Boot, and Disabled. PXE support allows the system to boot
from the network. Changes take effect after the system
reboots.
Table 2-4. CPU Information Screen (continued)
Option Description