Dell PowerEdge M605 - Manual (Page 133)

Installing Blade Components
133
Figure 3-19. Installing and Removing a Heat Sink (PowerEdge M605)
4 Remove the heat sink.
Set the heat sink upside down on the work surface to avoid contaminating
the thermal grease.
5 Use a clean lint-free cloth to remove any thermal grease from the surface of
the processor shield.
6 Pull the socket-release lever straight up until the processor is released
from the socket. See Figure 3-20 (PowerEdge M600) or Figure 3-21
(PowerEdge M905, M805, or M605).
1 heat sink 2 screws (4)
3 socket CPU2 4 socket CPU1
2
1
4
3