Dell PowerEdge M605 - Manual (Page 183)

Troubleshooting Your System
183
Troubleshooting USB Devices
NOTE:
USB devices can be connected only to the blade front panel. Total length of
a USB cable should not exceed 3 m (9.8 ft).
Problem
• USB device or USB device cable
• Multiple devices connected directly to blade (powered USB hub not used)
• Blade
Action
1 Ensure that the blade(s) is turned on.
2 Check the USB device connection to the blade.
3 Swap the USB device with a known-working USB device.
4 Connect the USB devices to the blade using a powered USB hub.
5 If another blade is installed, connect the USB device to that blade. If the
USB device works with a different blade, the first blade may be faulty. See
"Getting Help" on page 217.
Responding to a Systems Management Alert
Message
The CMC management applications monitor critical system voltages and
temperatures, and the cooling fans in the system. For information about the
CMC alert messages, see the Configuration Guide.
Troubleshooting a Wet Enclosure
Problem
• Liquid spills
• Splashes
• Excessive humidity