Removing memory (with optional memory riser cards) – Dell Precision T7400 (Late 2007) User Manual
Page 187
Adding and Replacing Parts
187
19 Connect your computer and devices to electrical outlets, and turn them
on.
20 Press
Memory Info.
The computer should have changed the value of
Installed Memory to
reflect the newly installed memory. Verify the new total. If it is correct, skip
to step 22.
21 If the memory total is incorrect, turn off and disconnect your computer
and devices from their electrical outlets.
Return to step 1 of this procedure, but instead of installing new memory,
check the installed memory modules to ensure that they are seated
properly in their sockets.
22 When the Installed Memory total is correct, press
setup.
23 Run the Dell Diagnostics to verify that the memory modules are operating
properly. See "Dell Diagnostics" on page 123.
Removing Memory (With Optional Memory Riser Cards)
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the
Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from
the electrical outlet before opening the cover.
NOTICE:
To prevent static damage to components inside your computer, discharge
static electricity from your body before you touch any of your computer’s electronic
components. You can do so by touching an unpainted metal surface on the
computer.
1 Follow the procedures in "Before You Begin" on page 139.
CAUTION:
Your computer is heavy (it has an approximate minimum weight of 55
lbs) and can be difficult to maneuver. Seek assistance before attempting to lift,
move, or tilt it; this computer requires a two-man lift. Always lift correctly to avoid
injury; avoid bending over while lifting. See your
Product Information Guide for
other important safety information.
CAUTION:
The computer stand should be installed at all times to ensure
maximum system stability. Failure to install the stand could result in the computer
tipping over, potentially resulting in bodily injury or damage to the computer.