Dell B2375dnf Mono Multifunction Printer - Manual (Page 70)

Power Save Mode (Administrator only)
If your country switches to Daylight Savings Time each year, use this procedure to
automatically switch to Daylight Savings Time and to Standard time.
1 Press My Settings Machine Setup Initial Setup Power Save from the home
screen.
2 Press the left/right arrows to select the time settings you want.
3 Press the home icon ( ) to return to Home Screen.
NOTE: Available setting range is from 1min. to 120 min. and you can also access this
mode from the EWS (Printer Settings Print Settings Setup Menu and select
Print Power Save).
Setting the Time and Date (Administrator only)
The time and date are printed on all faxes.
NOTE: It may be necessary to reset the correct time and date if loss of power to the
printer occurs.
To set the time and date:
1 Press My Settings Machine Setup Initial Setup Date & Time from the home
screen.
2 Enter the date and time each using the up/down arrows.
Day= 01 ~ 31
Month= 01 ~ 12
Year= 2000 ~ 2036
Hour= 01 ~ 12 (12-hour mode)
00 ~ 23 (24-hour mode)
Minute= 00 ~ 59
3 Press the home icon ( ) to return to Home Screen.
Setting the Clock Mode (Administrator only)
To set the clock mode:
1 Press My Settings Machine Setup Initial Setup Clock Mode from the home
screen.
2 Press the left/right arrows to select the appropriate option you want.
Hour= 01 ~ 12 (12-hour mode)
00 ~ 23 (24-hour mode)
3 Press the home icon ( ) to return to Home Screen.
- 69 ­