Dell B2375dnf Mono Multifunction Printer - Manual (Page 189)

Duplex
You can set the printer to print copies on both sides of paper.
1 Load the documents to be copied in the DADF.
For details about loading a document, see "Loading an Original Document".
2 Press Copy from the home screen
3 Press the left/right arrows to select Duplex.
4 Select the binding option you want.
• 1->1 side: Prints in normal mode.
• 1->2 Side Long Edge: Prints pages to be read like a book.
• 1->2 Side Short Edge: Prints pages to be read by flipping through it like a note
pad.
• 2->1 Side Long Edge: Scans both sides of the originals and prints each of them on
a separate sheet.
• 2->1 Side Short Edge: Scans both sides of the originals and prints each one on a
separate sheet, but the information on the back side of the printout is rotate 180°.
• 2->2 Side Long Edge: Scans both sides of the original and prints on both sides of
the paper. This function produces exactly the same print out from the originals.
Press Start ( ) on screen to begin copying.
Zoom
You can reduce or enlarge the size of a copied image, from 25 percent to 400 percent,
when you copy original documents from the document glass or the DADF.
NOTE: When you make a reduced copy, black lines may appear at the bottom of
your copy.
To select from the predefined copy sizes:
1 Press Copy from the home screen.
2 Press the left/right arrows to select Zoom.
3 Press the left/right arrows to select the zoom rate you want.
4 You can select from Auto Fit, 25~400%.
NOTE: If a document is detected in the DADF, the Auto Fit does not work.
Darkness
Adjust the darkness to make the copy lighter or darker than the original.
1 Press Copy from the home screen
2 Press the left/right arrows to find Darkness.
3 Press the -/+ buttons to select level(-5 ~ 5) you want.
4 Press Start ( ) on screen to begin copying.
- 188 ­