beautypg.com

Installing the fan assembly, D. see figure 3-11, Drive 1 if installed. see figure 3-11 – Dell PowerEdge 860 User Manual

Page 58: Figure 3-11, Posts and out of the chassis. see figure 3-11

background image

58

Installing System Components

Figure 3-11.

Installing and Removing the Fan Assembly

Installing the Fan Assembly

1 Align the holes in the fan assembly with the two fan assembly securing posts. See Figure 3-11.
2 Lower the fan assembly until the release levers snap onto the securing posts.
3 Route the cables in the fan assembly cable tray. See Figure 3-11.
4 Reconnect the hard drive 1 data cable to the hard drive. See Figure 3-11.
5 Reconnect the fan assembly power cable to the system board.
6 Install the cooling shroud. See "Installing the Cooling Shroud" on page 48.
7 Close the system. See "Closing the System" on page 47.

1

release levers (2)

2

power cable

3

securing posts (2)

4

hard drive 1 data cable

5

cable tray

3

5

2

4

1

See also other documents in the category Dell Computer hardware: