Dell PowerEdge C5125 - Manual (Page 84)

84 Troubleshooting
Memory Issues
If you have installed incompatible memory modules, the system may not
boot. Verify the memory you've installed has been tested with your board. If
the installed memory is compatible, remove and reinstall the memory
modules.
Defective memory modules may cause boot errors. To isolate a specific
memory module as defective, boot the system with just one memory module
installed at a time.
Monitor Issues
Monitor configurations can cause boot failure. Run through the following
checklist to verify monitor operation:
• Ensure the monitor is plugged in and turned on.
• Ensure all cables are connected properly between the monitor and the
computer.
• Check that the brightness and contrast controls on the monitor are not too
low.
Most monitors employ indicator LEDs showing status. Refer to the monitor's
documentation to confirm operation. If the problem still persists, test or
replace the monitor on a different AC outlet/different system.
Power Supply and Chassis Issues
• Ensure that the chassis and power supply is appropriate for the processor
model and frequency.
• Ensure all power cables and connectors are firmly connected to the power
supply and the AC outlet.
Table 4-1. Processor Model and Frequency Identification
CPU's
Model
Core Frequency (GHz)
Phenom II 910e 4 2.6
Athlon II 610E 4 2.4
Athlon II 260u 2 1.8