Dell PowerEdge C5125 - Manual (Page 23)

Using the System Setup Program 23
SATA Port0-3: [Not Detected][Hard Disk][ATAPI CDROM] While entering
setup, BIOS auto detects the presence of SATA devices. This displays the
status of auto detection of SATA devices. This item displays information only
and is unavailable when AHCI Mode is enabled.
Power Saving Features: Disable/Enable power saving features in the server
board.
PCI Configuration
Scroll to this item and press to view the following screen. The PCI
Screen provides fields to configure the onboard NIC controllers.
*1: [Disabled] [Enabled]
Control Group User Access Level
OnChip SATA Type Access Level 1
Power Saving Features Access Level 1
BIOS SETUP UTILITY
Advanced
PCI Configuration iSCSI Remove Boot if enable
iSCSI boot, must disable PXE boot
iSCSI Remote Boot
NIC1 - 82576EB
NIC2 - 82576EB
IOMMU
• Active State Power
Management
Configuration
[DISABLED]*1
[Enabled with PXE]*2
[Enabled with PXE]*2
[DISABLED]*1


,

+,

F1
F10
ESC
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit