Dell PowerEdge C5125 - Manual (Page 29)

Using the System Setup Program 29
Boot Settings Configuration
Select this item and press Enter to view the following submenu items:
*1: [Disabled] [Enabled] (If you enable PXE first, the 1
st
boot device will set
to PXE. Disable PXE first, the device priority will not change).
Quick Boot: enable this item to allow BIOS to skip certain tests during the
POST, which will decrease boot up time.
Quiet Boot: enable this item to display the OEM logo instead of POST
messages. When disabled, normal POST messages appear.
Wait For 'F1' If Error: enable this item to have the system prompt you to
press F1 if an error occurs. This enables you to view the error.
Force PXE First: Enable and disable this item to force a network boot (PXE).
Force PXE Boot Only: Enable/Disable PXE to be the Only boot device.
BIOS SETUP UTILITY
Boot
Boot Settings Configuration Allows BIOS to skip
certain tests while
booting. This will decrease
the time needed to boot
the system.
Quick Boot
Quiet Boot
Wait For ’F1’ If Error
Force PXE First
Force PXE First Boot Only
Force USB First [Enabled]
[Enabled]
[Disabled]
[Enabled] *1
[Disabled]
[Disabled]


,

+,

F1
F10
ESC
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit