Dell Print Page Services - Manual (Page 5)

1
Introduction
Xerox Device Agent (XDA) allows you to manage printing devices over the network. The
application finds printers, displays their statuses, automatically collects meters from the printers,
submits the meter reads, and allows for remote management of the printers.
Hardware and Software Requirements
Before you can start using the client software, you must ensure that the following requirements
are met:
Operating System: (32- and 64-bit)
•
Windows ® XP Professional with Service Pack 3
• Windows Server ® 2003 with Service Pack 2
•
Windows Server
®
2008 with Service Pack 1 and 2008 R2 with Service Pack 1
• Windows Server ® 2012
•
Windows ® 7 Professional and Ultimate
• Windows ® 8
• Windows Vista ® Service Pack 2 Professional and Ultimate
•
Microsoft ® .NET framework 3.5 with Service Pack 1 installed
Memory
•
512 MB RAM (1 GB Recommended) for Windows ® XP and Windows Server ® 2003
•
1 GB RAM (1.5 GB Recommended) for Windows Vista ® , Windows ® 7 Professional,
Windows
®
8, Windows Server
®
2008, 2008 R2, 2012, and Windows
®
2003, 2008, 2008 r2
Processor: 1.7 GHz processor or better
Hard Disk: Minimum free space is approximately 380 MB, where 280 MB of that is for the
Microsoft
® .NET 3.5 SP1 framework software, if not previously installed.
Minimum Resolution: 1024x768
Permissions: You must install the application software on the client computer using the
administrative account or an account with administrative privileges.
Internet connection: Required
Notes:
1. We recommend that you update your host computers with the latest critical patches and
service releases from Microsoft Corporation.
2. The Network Transmission Control Protocol/Internet Protocol (TCP/IP) must be loaded and
operational.
Only network connected printers are supported by Dell Toner Monitoring Service and
Dell Print Page Service.