Dell Precision R5400 (Mid 2008) User Manual
Page 35

Troubleshooting
35
M
EMORY
DATA
LINE
FAILURE
AT
ADDRESS
,
READ
VALUE
EXPECTING
VALUE
—
A
memory module may be faulty or improperly seated. Reinstall the memory
modules and, if necessary, replace them. See your
Service Manual at
support.dell.com for more information.
M
EMORY
DOUBLE
WORD
LOGIC
FAILURE
AT
ADDRESS
,
READ
VALUE
EXPECTING
VALUE
—
A memory module may be faulty or improperly seated. Reinstall the
memory modules and, if necessary, replace them. See your
Service Manual at
support.dell.com for more information.
M
EMORY
ODD
/
EVEN
LOGIC
FAILURE
AT
ADDRESS
,
READ
VALUE
EXPECTING
VALUE
—
A memory module may be faulty or improperly seated. Reinstall the
memory modules and, if necessary, replace them. See your
Service Manual at
support.dell.com for more information.
M
EMORY
WRITE
/
READ
FAILURE
AT
ADDRESS
,
READ
VALUE
EXPECTING
VALUE
—
A
memory module may be faulty or improperly seated. Reinstall the memory
modules and, if necessary, replace them. See your
Service Manual at
support.dell.com for more information.
N
O
BOOT
DEVICE
AVAILABLE
—
The computer cannot find the hard drive. If
the hard drive is your boot device, ensure that the drive is installed, properly
seated, and partitioned as a boot device.
N
O
BOOT
SECTOR
ON
HARD
DRIVE
—
The operating system may be corrupted.
Contact Dell (see "Contacting Dell" on page 71).
N
O
TIMER
TICK
INTERRUPT
—
A chip on the system board may be
malfunctioning. Run the System Set tests in the Dell Diagnostics (see "Dell
Diagnostics" on page 39).
N
OT
ENOUGH
MEMORY
OR
RESOURCES
. E
XIT
SOME
PROGRAMS
AND
TRY
AGAIN
—
You have too many programs open. Close all windows and open the program
that you want to use.
O
PERATING
SYSTEM
NOT
FOUND
—
Reinstall the hard drive (see your
Service
Manual at support.dell.com). If the problem persists, contact Dell (see
"Contacting Dell" on page 71).
O
PTIONAL
R O M
BAD
CHECKSUM
—
The optional ROM has failed. Contact
Dell (see "Contacting Dell" on page 71).
A
REQUIRED
. D L L
FILE
WAS
NOT
FOUND
—
The program that you are trying to
open is missing an essential file. Remove and then reinstall the program.