Dell PowerVault DL2100 - Manual (Page 98)

98
Installing System Components
Figure 3-13. Removing and Installing the Cooling Shroud
Installing the Cooling Shroud
1 Align the tabs on the right side of the cooling shroud with the cutouts in
the right chassis wall.
2 Lower the right end of the shroud into the chassis cutouts and rotate the
left end down inside the left chassis wall.
3 Close the system. See "Closing the System."
4 Reconnect the system to the electrical outlet and turn on the system and
attached peripherals.
1 lift handles 2 alignment tabs
3 processors
1
2
3