Dell PowerVault DL2100 - Manual (Page 131)

Installing System Components
131
CAUTION:
Never remove the heat sink from a processor unless you intend to
remove the processor. The heat sink is necessary to maintain proper thermal
conditions.
5 Release one of the heat-sink release levers. See Figure 3-27.
6 Wait 30 seconds for the heat sink to loosen from the processor.
7 Release the other heat-sink release lever.
8 Gently lift the heat sink off of the processor and set the heat sink aside
upside down (thermal grease side facing up).
Figure 3-27. Installing and Removing the Heat Sink
1 heat sink 2 release lever (2)
1
2