beautypg.com

Straight up to clear the chassis. see figure 3-24, Latches on the riser the engage. see figure 3-24 – Dell PowerVault DL2100 User Manual

Page 120

background image

120

Installing System Components

Figure 3-24.

Removing and Replacing Expansion-Card Riser 2

Removing Expansion-Card Riser 2 From the Expansion-Card Bracket

1 Turn off the system and attached peripherals, and disconnect the system

from the electrical outlet.

2 Open the system. See "Opening the System."
3 Remove any expansion cards from the expansion-card riser 2. See

"Removing an Expansion Card."

4 Remove expansion-card riser 2. See "Removing Expansion-Card Riser 2."

1

expansion-card riser 2

2

release latch

3

pin collars (2)

4

mounting pins (2)

5

riser 2 connector on system board

1

3

2

4

5

See also other documents in the category Dell Hardware: