System messages, The system has detected an error. see – Dell PowerEdge 800 User Manual
Page 21

System Messages
System messages appear on the screen during system boot to notify you of a possible problem with the system.
lists the system messages that can
occur and the probable cause and corrective action for each message.
Table 2-7. System Messages
Possible expansion-card failure.
See "
Troubleshooting Expansion Cards
" in "Troubleshooting Your System."
Possible video card failure.
See "
Troubleshooting Expansion Cards
" in "Troubleshooting Your System."
Diskette or hard-drive failure.
Ensure that the diskette drive and hard drive(s) are properly connected. See "
Installing
Drives
" for information on the drive(s) installed in your system.
Possible USB failure.
See "
Troubleshooting a USB Device
" in "Troubleshooting Your System."
No memory modules detected.
See "
Troubleshooting System Memory
" in "Troubleshooting Your System."
System board failure.
See "
Getting Help
."
Memory configuration error.
See "
Troubleshooting System Memory
" in "Troubleshooting Your System."
Possible system board resource and/or
system board hardware failure.
See "
IRQ Assignment Conflicts
" in "Finding Software Solutions." If the problem persists, see
"
Getting Help
."
Possible expansion card failure.
See "
Troubleshooting Expansion Cards
" in "Troubleshooting Your System."
Other failure.
Ensure that the diskette drive, optical drive, and hard drive(s) are properly connected. See
"
Troubleshooting Your System
" for the appropriate drive(s) installed in your system.
If the problem persists, see "
Getting Help
."
The system is in a normal operating
condition after POST.
Information only.
NOTE:
If you receive a system message that is not listed in
, check the documentation for the application that is running when the message
appears or the operating system's documentation for an explanation of the message and recommended action.