Dell OptiPlex SX260 - Manual (Page 18)

1. Using the four #6 wood screws (0.625 inch; 15.88 mm) provided, attach the mounting plate to a solid surface with a minimum thickness of 1 inch (2.5
cm).
2. Orient the computer and stand under the mounting plate approximately 1 inch (2.5 cm) from the edge of the mounting plate.
3. Lift the computer and stand, insert the stand into the mounting bracket, and slide the stand until the release lever tab is inserted and fully engaged
through the slot in the mounting plate.
4. Attach the cable cover (if used).
Removing the Computer from the Mounting Plate
NOTE: Before attaching the mounting plate to a surface, first orient yourself with how the stand will attach to the mounting plate.
1 release lever tab
2 mounting plate slot
3 screw holes (4)
4 solid surface with a 1-inch (2.5 cm) minimum thickness
CAUTION: Attach the mounting plate to a solid surface capable of supporting 40 lbs (18.1 kg) hanging weight.