Dell 7130cdn Color Laser Printer User Manual
Page 22
Network Basics
Dell 7130cdn Professional Color Printer
User Guide
22
Using the Control Panel
To manually set the IP address:
1. On the control panel, select Printer Setup > Connection Setup > Network Setup >
TCP/IPv4 Setup, then press the OK button.
2. Select DHCP/BOOTP, then press the OK button to select Off.
3. Select IPv4 Address, then press the OK button.
4. Enter the printer’s IP address, then press the OK button.
Changing or Modifying the IP Address Using the EWS
The EWS provides a simple interface that enables you to manage, configure, and monitor
networked printers from your desktop using an embedded Web server. For complete information
about the EWS, click the Help button in the EWS to go to the EWS Online Help.
After setting the printer’s IP address, you can modify TCP/IP settings using the EWS.
1. Launch your Web browser.
2. Enter the printer’s IP address in the browser’s Address field.
3. Click Properties.
4. Select the Protocols folder on the left navigation panel.
5. Select TCP/IP.
6. Enter or modify the settings, and then click Save Changes at the bottom of the page.
See also:
System Administrator Guide
Network Mask
If you are unsure, leave this blank; the printer
chooses an appropriate mask.
Default Router/Gateway address
Router address is required to communicate with
the host device from anywhere other than the
local network segment.
Information Required for Manual IP Addressing