Dell 7130cdn Color Laser Printer - Manual (Page 126)

Troubleshooting
Dell 7130cdn Professional Color Printer
User Guide 126
Print is Irregular or Mottled
Ink Rubs Off After Printing
Probable Causes Solutions
The media is moist from humidity. Remove the moist media and replace it with new,
dry media.
Unsupported media (wrong size, thickness, type,
etc.) is being used. Use Dell-approved media. See Supported Media
on page 43.
One or more of the imaging units may be
defective. Remove the imaging units one at a time, and
check for damage. If it is damaged, replace it.
Probable Causes Solutions
The media is moist from humidity. Remove the moist media and replace it with new,
dry media.
Unsupported media (wrong size, thickness, type,
etc.) is being used. Use Dell-approved media. See Supported Media
on page 43.
Media type is set incorrectly. When printing envelopes, labels, heavyweight
stock, or transparencies, specify the appropriate
media type in the printer driver.
Fuser is near end of life. Remove the fuser and check if it is near end of life.
If it is, replace it.