To avoid damage, always remove misfed paper gently, without tearing it. Try to remove the paper
in the direction that the paper would normally feed. Any piece of media left in the printer, whether
large or small, can obstruct the paper path and cause further misfeeds. Do not reload paper that
has misfed.

Note:

The image is not fixed on the media before the fusing process. Do not touch the

printed surface of the media when removing it. Unfused toner may stick to your hands. Make
sure not to spill any toner inside the printer.

Warning:

If you accidentally get toner on your clothes, lightly dust them off as best as you

can. If some toner remains on your clothes, use cool, not hot water, to rinse the toner off. If
toner gets on your skin, wash it off with cool water and a mild soap. If you get toner in your
eyes, wash it out immediately with cool water and consult a doctor.