Dell Intel PRO Family of Adapters - Manual (Page 38)

(http://www.support.dell.com) for the latest information and component updates.
Dell also provides a Firmware Dell Update Package (FW-DUP) that can be used to update the flash. For more information on
the FW-DUP, click here .
NOTE: All Intel 10 gigabit server adapters shipped by Dell are shipped with the boot option ROM disabled for FCoE,
iSCSI Boot, and PXE. Intel gigabit server adapters shipped by Dell are shipped with the boot option ROM disabled for
iSCSI Boot and PXE.
Running BootUtil
The syntax for issuing BootUtil command line options in DOS is: BootUtil [-option] or -[OPTION]=[VALUE]
To run the Linux version of BootUtil, the qv driver must be loaded first. If the qv driver is not installed, follow the steps below
load it.
1. Log in as root and create a temporary directory to build the Intel® Network Connections Tools driver.
2. Copy 'install' and the appropriate iqvlinux.tar.gz file for your platform to the temporary directory. The versions of Linux
supported are Linux 32 (x86) and Linux64e (x64). The appropriate iqvlinux.tar.gz file is located in the corresponding
directory for your platform.
3. Go to the temporary directory and run the command: './install'
The qv driver is now installed and the files in the temporary directory can be removed.
4. Copy the correct version of BootUtil from the appropriate directory of the CD to your system.
Command Line Parameters
BootUtil accepts one executable parameter and its associated non-executable options in an execution. If conflicting executable
options are supplied (such as -FLASHENABLE and -UPDATE used together), BootUtil exits with an error.
The options, where applicable, are listed in logical groups.
NOTE: On the following adapters, only one image, either iSCSI Boot or PXE Option ROM, is allowed for all ports since
the ports share the same flash. You cannot have one port with a flash image for iSCSI Boot and the other with a flash
image for PXE Option ROM.
Intel® PRO/1000 PT Dual Port Server Adapter
Intel® PRO/1000 PT Server Adapter
Intel® PRO/1000 PF Server Adapter
Intel® 10 Gigabit XF SR Server Adapter
Intel® 10 Gigabit AT Server Adapter
Intel® 10 Gigabit AF DA Dual Port Server Adapter
NOTE: If you enter BootUtil without any command line options, the utility displays a list of all supported Intel network
adapters found in your system.
General Options
Parameter Description
-HELP or -? Displays a list of options.
-EXITCODES Displays exit codes returned to the operating system by BootUtil.
-IMAGEVERSION or -IV Displays firmware types and version numbers from a resource image.
If used with the -ALL option, each resource image is continuously displayed for all
adapters.
If used with the -NIC option, the resource image is in the adapter flash.
If used with the -FILE option, the resource image is in the FLB file.
-E Enumerates all supported network ports in the system.
-O=[FILENAME] Redirects all text output to the specified filename. It must be used with the -E or -NIC