Noise emissions levels, Laser notice, Energy star – Dell 1320c Network Color Laser Printer User Manual
Page 126: Energy star® compliance

La información siguiente se proporciona en el dispositivo o dispositivos descritos en este documento, en cumplimiento con los requisitos de la Norma oficial
mexicana (NOM):
.
Noise Emissions Levels
The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.
Laser Notice
The printer is certified in the U.S. to conform to the requirements of 21CFR, Chapter 1, Subchapter J for Class I (1) laser products, and elsewhere is certified as
a Class I laser product conforming to the requirements of IEC 60825-1.
Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is nominally a 5 milliwatt gallium arsenide
laser operating in the wavelength region of 770-795 nanometers. The laser system and printer are designed so there is never any human access to laser
radiation above a Class I level during normal operation, user maintenance, or prescribed service condition.
Energy Star
ENERGY STAR® Compliance
Any Dell™ product bearing the ENERGY STAR emblem on the product or on a start
-up screen is certified to comply with Environmental Protection Agency (EPA)
ENERGY STAR
requirements as configured when shipped by Dell.
ENERGY STAR® Emblem
Exportador: Dell Inc.
One Dell Way
Round Rock, TX 78682
Importador: Dell México S.A. de C.V.
Paseo de la Reforma 2620 - 11° Piso
Col. Lomas Altas
11950 México, D.F.
Enviar a:
Dell México S.A. de C.V.
al Cuidado de Kuehne & Nagel de México S. de R.L.
Avenida Soles No. 55
Col. Peñon de los Baños
15520 México, D.F.
Modelo
Suministro Entrada
Frecuencia
Dell™ Color Laser Printer 1320c
10A
110-127 V 50/60 Hz
Sound power level
Printing 6.4B, 51.6dB(A)
Idling
4B, 22.9dB(A)