Dell 1320c Network Color Laser Printer - Manual (Page 103)

Other Problems
Contacting Service
When you call for printer service, be prepared to describe the problem you are experiencing or the error message on the display.
You need to know your printer model type and serial number. See the label on the back of the printer near the controller card for this information.
back to contents page
Cannot print from Tray 1 because the Covers paper is
curled.
Load the Covers paper into the single sheet feeder.
Problem Action
Condensation has occurred inside the printer.
This usually occurs within several hours after you heat the room in winter. This also occurs when the printer
is operating in a location where relative humidity reaches 85% or more. Adjust the humidity or relocate
the printer to an appropriate environment.
"092-310 Printer error." or "092-910 Clean
the CTD sensor.
" is displayed on the Status
Monitor.
Clean the CTD sensor. See " Cleaning the CTD Sensor Inside the Printer ."