Dell PowerVault 725N (Rackmount NAS Appliance) - Manual (Page 24)

Running the NIC Diagnostics Program
To run the NIC diagnostics program:
1. Log into the NAS Manager.
2. Click Maintenance.
3. Click Terminal Services, and then log into the NAS system as an administrator.
4. Click Administrative Tools on the Advanced Administration menu.
5. Click Broadcom Network Teaming.
This launches the Broadcom Advanced Control Suite.
6. Click the Diagnostics tab.
7. In the left window, click the adapter (NIC) you want to test.
8. In the right window, select the tests you want to run OR click Select All to select all tests.
9. Click Test to run selected tests.
For more information, see the online help for your NIC.
Back to Contents Page
NOTE: Using Terminal Services to run the NIC diagnostics program may cause your Terminal Services session to disconnect. In the event you lose the
connection, wait a few minutes and then log in again. The test results will be displayed after logging in. Also, you may perform the NIC diagnostics tests
using a keyboard, monitor, and mouse attached directly to the NAS system.
NOTE: The default administrator user name is administrator and the default password is powervault.