Flash exposure compensation – Canon BP-511 User Manual
Page 91
91
Flash Photography
4
Using the Built-in Flash
Flash Exposure Compensation
The EOS D60 camera can adjust the level of the built-in flash or any EX-series Speedlite. The
compensation amount can be up to +/–2 stops in 1/2-stop increments. You cannot use flash
exposure compensation in the Basic Zone.
1
Press the <
> button.
(
6
)
2
Set the exposure compensation
amount.
●
Set the Quick Control Dial Switch to <ON>.
●
While looking at the LCD panel or
viewfinder display, turn the <
> dial.
●
The [+] side indicates increased compensa-
tion, and the [–] side indicates decreased
compensation.
Decreased
Increased
exposure exposure
●
Once set, the exposure compensation
amount remains in memory after the Main
Switch is set to <OFF >.
●
To cancel, set the compensation amount to
the < > position.
●
You can set the camera to adjust exposure compensation in 1/3-stop incre-
ments. (C.Fn-4-1
→
122)
●
You can also disable the Auto reduction of fill flash function. (C.Fn-10-1
→
124)
Flash exposure compensation can also be set with EX-series Speedlites. If flash
exposure compensation is set with both the camera and EX-series Speedlite, the
Speedlite's setting will override the camera’s.