Canon BP-511 - Manual (Page 67)

67
Advanced Operations
3
LCD Panel Illumination
Custom White Balance Setting/LCD Panel Illumination
● For best results, use subjects such as plain white paper for white balance basis.
● White balance data is loaded from the partial metering zone ( → 17).
● You can store white subjects photographed under various conditions on the CF
card, then select these images as needed for the [Custom WB] function as an
easy way of setting the ideal white balance for any lighting conditions.
● The default setting for < > is the same as the default setting for < >.
The LCD panel can be illuminated for about 4 sec. by pressing the < > button. Pressing the
button again turns off the illumination.
After a picture is taken, the LCD panel illumination turns off automatically after 2 sec.
On the menu, select [LCD illumi.]
and set the LCD panel illumina-
tion.
● Press the < MENU> button.
● Turn the < > dial to select [LCD illumi.],
then press < >.
● Turn the < > dial to select [On], then
press < >.
➡ The LCD panel illumination will be enabled,
and the menu will reappear.
● Press the < MENU> to quit the menu and
turn off the display.
Illuminating the LCD panel
● Press < >.
● To turn off the illumination, press < >
again.
● If you operate a button or dial for picture-
taking while the LCD panel is illuminated,
the illumination will continue. If you press a
menu or image playback button, the
illumination will turn off.
● If C.Fn-12-1/2/3 has been set, pressing < > will not turn off the LCD panel
illumination (it will turn off automatically).
● If you take a picture while the LCD panel is illuminated, the illumination will
continue as you shoot.
● LCD panel illumination works in all shooting modes.