Canon BP-511 - Manual (Page 52)

52
Setting Processing Parameters
1 From the menu, select [Param-
eters].
● Press the < MENU> button.
● Turn the < > dial to select [Parameters],
then press the < > button.
2 Select [Set].
● Turn the < > dial to select [Set up], then
press < >.
● By default, Sets 1 to 3 have all the param-
eters set to 0 (Standard).
3 Select the desired set number.
● Turn the < > dial and select Set [1], Set
[2], or Set [3]. Then press < >.
Parameter
Contrast
Sharpness
Saturation
Color tone
Setting
Adjusts the
contrast
Adjusts the
sharpness
Adjusts the
color saturation
Adjusts the color
balance
Level
– (Low)
0 (Standard)
+ (High)
– (Low)
0 (Standard)
+ (High)
– (Low)
0 (Standard)
+ (High)
– (Red)
0 (Standard)
+ (Yellow)
Effect
Takes pictures with lower contrast.
Takes pictures with normal contrast.
Takes pictures with higher contrast.
Takes pictures with lower sharpness.
Takes pictures with normal sharpness.
Takes pictures with higher sharpness.
Takes pictures with muted colors.
Takes pictures with normal color saturation.
Takes pictures with intense colors.
Makes skin tones look more reddish.
A standard color balance is applied.
Makes skin tones look more yellowish.
Contents of processing for the captured image (parameters: [contrast], [sharpness],[saturation]
and [color tone]) can be set with the camera, and you can set and register up to three sets of
parameters. Defaut setting is “standard” (0 for all parameters).