Canon BP-511 - Manual (Page 131)

131
Reference
7
REFERENCE
: Automatic setting
: Selection possible
Mode
AF AF point selection Drive Metering mode
Dial ONE SHOT AI SERVO AI FOCUS Auto Manual Single Continuous Evaluative Partial
Mode
Built-in flash White balance Quality
Dial
Auto Manual
Red-eye
Auto Manual Large Large Medium Medium Small Small RAW
reduction
Center-
weighted
average
AF Modes and Drive Modes
Drive mode ONE SHOT AF AI Servo AF AI Focus AF
Single
An image cannot be taken unless
focus is achieved. When focus is
achieved, it is locked. With
evaluative metering, the exposure
setting is also locked. (The exposure
setting is stored in memory before
the picture is taken.)
The above conditions apply
during continuous shooting.
(approximately 3 images per
second to a maximum of 8
images.)
Autofocus tracks the moving
subject, and the exposure is
set when the picture is taken.
The above conditions apply
during continuous shooting.
(approximately 2.5 images
per second, up to a maximum
of 8 images.)
Automatically switches
between ONE SHOT AF
and AI Servo AF
according to the subject
status.
Continuous
Function Availability Table