Self-timer operation – Canon BP-511 User Manual
Page 81
81
Advanced Operations
3
Self-timer Operation
The self-timer is convenient for group photographs. You can use it in any Basic mode or
Creative mode. We recommend using a tripod when you use the self-timer.
1
Select the self-timer.
●
Press the < DRIVE > button (
6
), and turn
the <
> dial to select <
>.
2
Focus on the subject.
●
Make sure the focus confirmation light <
●
>
and the exposure setting are displayed.
3
Take the picture.
●
Press the shutter button down fully.
➡
The beeper sounds as the red-eye
reduction lamp operates, and the picture is
taken after 10 seconds.
First 8 seconds:
Slow beeps and the lamp blinks slowly.
Last 2 seconds:
Faster beeps and the lamp stays on.
➡
While the self-timer is operating, the LCD
panel shows count down.
●
To cancel the self-timer, press the < DRIVE>
button.
Do not stand in front of the camera when you press the shutter button to start the
self-timer. Doing so prevents the camera from focusing on the subject.
●
You can set the beep that indicates the subject is in focus and the beep that
indicates the self-timer is operating to [ On ] or [ Off ]. (
→
118)
●
When using the self-timer to shoot only yourself, lock the focus (
→
58) on an
object at about the same distance as where you will be.
●
You can use the Remote Switch RS-80N3 (optional) or Timer Remote Controller
TC-80N3 (optional) to take a picture when you are away from the camera.