Compaq Wireless LAN 300 - Manual (Page 27)

PowerStorm 300 AGP and 300/350 PCI Graphics Controllers 4–1
4
Installation (Windows NT)
4.1 Introduction
__________________________ Note _____________________________
Chapter 4 pertains to the Windows NT operating system only; if you are running
Compaq Tru64 UNIX, see chapter 6.
____________________________________________________________
This chapter describes the installation of the PowerStorm 300 AGP and 300/350 PCI
graphics controller in a Compaq Professional running the Windows NT operating system.
If your PowerStorm 300 AGP or 300/350 PCI graphics controllers came pre-installed, the
software is already in place, and you do not need to perform the procedures in this chapter.
Topics included in this chapter are:
•
Hardware installation
•
Software installation
4.1.1 Unpacking
The graphics controller option kit contains the graphics controller, the associated software,
and this installation guide. The PowerStorm 300 AGP and 300/350 PCI software packages
include a “break-the-seal” license and a compact disc (CD) containing the PowerStorm
300/350 display drivers.