Compaq Wireless LAN 300 - Manual (Page 11)

PowerStorm 300 AGP and 300/350 PCI Graphics Controllers 1–1
1
PowerStorm 300 AGP Graphics
Controller Overview
1.1 Introduction
This chapter provides a brief overview of the PowerStorm 300 AGP graphics controller
hardware. The PowerStorm 300 AGP graphics controller is available for Intel platforms
only.
1.2 Description
The PowerStorm 300 AGP graphics controller is a single expansion-slot, 32-bit AGP bus
module that provides 2D and 3D graphics acceleration for Compaq Professional
Workstations.
The PowerStorm 300 AGP graphics controller includes 16 MB of CDRAM texture
memory and is available as a full length ATX or NLX form factor. See Table 1-1 for the
part number.
Table 1-1 PowerStorm 300 AGP Graphics Controller Part Number
Compaq Part
Number Description
328778-B21 PowerStorm 300 AGP graphics controller in either full-length
ATX or NLX form factor.