Stopwatch, Changing settings – BMW 525i Sedan 2004 User Manual
Page 75
73
3.
Select "Limit" and press the controller
4.
Select "Select current speed" and
press the controller. The system adopts
your current speed as the limit.
Stopwatch
Control Center, for principle details, refer to
page
:
1.
Open "Navigation".
On vehicles without navigation: open
"Car Data"
2.
Select "Car Data" and press the con-
troller
3.
"Select Stopwatch" and press the con-
troller.
Starting and stopping
>
Select "Start" and press the controller.
The stopwatch starts at the displayed
time
>
Select "Reset" and press the controller.
The stopwatch is reset to 0 and starts
>
Select "Stop" and press the controller.
This stops the timer.
Taking an intermediate time reading
Select "Interim time" and press the control-
ler. This intermediate time appears below
the ongoing primary stopwatch count.
All of the remaining functions remain
available at all times while the stop-
watch is running. The stopwatch continues
operation in the background.
Changing settings
Brightness
The brightness of the display is automati-
cally adapted to the ambient lighting condi-
tions. However, you can change the stan-
dard setting for each specific key.
Control Center, for principle details, refer to
page
1.
Open the start menu by pressing the
button
2.
Open the menu by pressing the con-
troller
3.
Select "Display settings" and press the
controller
4.
Select "Brightness" and press the con-
troller
5.
Turn the controller to make the adjust-
ment
6.
Move the controller forwards to adopt
the set value.
Online Edition for Part No. 01 41 0 157 647 - © 07/03 BMW AG