BMW 525i Sedan 2004 - Manual (Page 74)

Everything under control
72
With the destination guidance
switched on, the distance is entered
automatically. <
Assistance window for computer and
trip computer
You can display the computer or the trip
computer in the assistance window.
Control Center, for principle details, refer to
page
16 :
1. Move the controller to the right to
switch to the assistance window and
press the controller
2. Select the menu item and press the
controller:
> "Onboard info"
> "Trip computer".
Speed limit
You can enter a speed and a Check Control
message indicates when you have reached
this speed. This enables you, for example,
to receive warnings if you exceed a speed
limit in an urban area.
You are only warned of reaching this speed
a second time if you again drive at least
3 mph/5 km/h slower.
Adjusting, changing
Control Center, for principle details, refer to
page
16 :
1. Open "Navigation".
On vehicles without navigation: open
"Car Data"
2. Select "Car Data" and press the con-
troller
3. Select "Limit" and press the controller
4. Select the speed and press the control-
ler
5. Turn the controller to select the desired
speed
6. Press the controller to apply the setting.
Switching on or off
Control Center, for principle details, refer to
page
16 :
1. Open "Navigation".
On vehicles without navigation: open
"Car Data"
2. Select "Car Data" and press the con-
troller
3. Select "Limit" and press the controller
4. Select "On" and press the controller.
is displayed with the speed limit
switched on.
Adopting your current speed as the
limit
Control Center, for principle details, refer to
page
16 :
1. Open "Navigation".
On vehicles without navigation: open
"Car Data"
2. Select "Car Data" and press the con-
troller
Online Edition for Part No. 01 41 0 157 647 - © 07/03 BMW AG